Operation Guidelines
How to Read and Analyze Avalon Miner Logs for Troubleshooting and Performance Optimization
Posted by BIT2MINERSupport on
How to Read and Analyze Avalon Miner Logs for Troubleshooting and Performance Optimization https://drive.google.com/file/d/1T_zeNIdL90l4TYXPnWBmG1NVjP_HxSZM/view?usp=sharing
Newest ANTMINER Power Cord & PDU Adaptation Instructions
Posted by BIT2MINERSupport on
Here are the customize a dedicated plug/socket and special PDU to meet the the high-power needs of ANTMINER S21 T21 newest miners Important Notice:For your safety, please use electronic device safely. Do not plug or remove the PSU cord when it is powered on! Please turn off PDU device first before plugging or removing the PSU cord if you need to take the miner off the shelf. ▷ANTMINER Dedicated Interface & ANTPDU Introduction 1. ANTMINER Dedicated Interface 1). Dedicated interface for Antminer P14 (as shown in P1), adapted to Antminer P13 plug, which used on S21, S19J XP; 2). ANTMINER P34 dedicated...
Antminer Operation and Maintenance Guidance
Posted by BIT2MINERSupport on
Antminer Operation and Maintenance Guidance This manual mainly tells the related points involved in Antminer operation and maintenance. The related personnel shall be familiar with the basic miner maintenance methods, including system upgrade, reset, restore, SD card recovery. Meanwhile, mastering simple fault judgment methods, such as high-temperature protection, fan fault, network fault is essential. Operation and maintenance personnel also need to have a certain understanding of the power, network, environment, etc. of the mining farm and regularly do the corresponding inspection work. Finding problems and resolving them timely can reduce the fault rate of the miner. Ⅰ. Daily Regular Inspection;...
- Tags: Antminer Operation and Maintenance Guidance, Operation and Maintenance Guidance, Operation Guidelines
T19 S19 S19Pro OVERCLOCKING USER'S GUIDE
Posted by BIT2MINERSupport on
T19 S19 S19Pro OVERCLOCKING USER'S GUIDE https://docs.google.com/document/d/1f6BV5_jqAEImUDZodQWl3nZb9zEm29cl/edit?usp=sharing&ouid=101292342869702618381&rtpof=true&sd=true
How to set up V9 V1.2 test jig manual for S9 series, S11, S15, T15, DR5, D5, S17, S17PRO and T17
Posted by Bit2minerSupport on
V9 V1.2 hashboard tester is applicable to S9 series, S11, S15, T15, DR5, D5, S17, S17PRO, and T17. I. Preparatory work Platform: computer (Win10 system) Tools: electric soldering iron (60W), solder wire Tester: hashboard tester V1.2 (buy from Bitmain official website) Drop-out line: 1 S9 drop-out line (buy 1 tester, get 1 drop-out line for free) Voltage regulating line: voltage regulating line is comparatively short, but can be extended (DIY), such as using abandoned fan line. Fan: 4 fans are needed when testing S17, S17PRO and T17. Tester has only two fan interfaces. Buy one-to-two connectors for fan or use other...
- Tags: Bitmain Hashboard Jig